Watch Complications

An exploration of watches and watchmaking

Menu

About Me

Brian

I am a watch enthusiast and maker that likes to share my thoughts and projects. As for credentials, I have a doctorate in computing, not horology. Member NAWCC. Watch on YouTube!

Movement and Case Combinations

Here are the custom case and movement combinations for which I have already created custom spacers and holders. Going the route of using a combination I have already created means just paying for the number of parts requested and shipping. Most kits are around $10-12 per print depending on which specific kit. Shipping in the domestic U.S. is currently $10 and most international destinations are around $22.

If you wish to purchase any of the below combinations, fill out the form below. For general inquires, use my contact form.

I have also created a variety of spacers to help add height or provide padding for movements going into generic cases, one example is spacers for ETA 6497/6498 movements going into generic cases that may be just a bit out of OEM spec.
Movement Case Details

Ronda 515 series including the 515, 515.24h, 515.24d, and 515.24h.2

Seiko SKX 007 to OEM spec. Works with original cases and those from reputable sellers like Crystal Times and namOKI mods. Fit may vary with aftermarket non-OEM cases.

Movements in the 515 series have different heights. For the regular 515 and the 515.24h the kit comes with the holder plus a dial side spacer. For the 515.24h.2 you can choose to have a dial side spacer or a movement side spacer plus the holder. https://youtu.be/gOzMdLjTNZc

Ronda 515 series (515.24h)

Seiko 7002 (original case)

https://youtu.be/4AL1XjUmEtI

 

ETA 2824

Sellita 200

Seiko SKX 007 to OEM spec. Works with original cases and those from reputable sellers like Crystal Times and namOKI mods. Fit may vary with aftermarket non-OEM cases.

Video coming soon!

Miyota 9015

Seiko SKX 007 (see above)

Comes with the holder plus a very thin 0.32mm dial side spacer. Could make a movement side spacer, but haven’t done that yet. https://youtu.be/sTG0cZIsrFY

Miyota 9015

An homage Panerai style 47mm case from eBay/AliExpress.

 

Comes with the holder and a dial side spacer. Video coming soon.

 

Miyota 2300 series

Generic 40mm dive case from eBay/AliExpress.

Holder only, also uses holder ring that comes with case. Note that case specs tend to change over time on generic cases, so the source of the case and the age of the case will likely determine if the holder fits.  https://youtu.be/Sn_jFbh4oY4

Miyota 2000 series (2035)

Generic 40mm dress case from eBay/AliExpress.

 

Comes with the holder and movement cover plus a dial side spacer. Note that case specs tend to change over time on generic cases, so the source of the case and the age of the case will likely determine if the holder fits.  https://youtu.be/R5OHSBzXqa8

Ronda 1015 (and similar)

Generic 40mm dive case from eBay/AliExpress.

Comes with the holder and a dial side spacer. As stated above, sometimes what looks like the same case may change specs over time. I’ve made holders for both the steel version that is older and from a different seller (https://youtu.be/MZeez4pCRos) and a newer case, shown in black (https://youtu.be/qZFivbKd9AU).

AL55/Miyota 1M12

Timex Weekender 38mm

Video coming soon.

 

Miyota 6T series (6T15, 28, 33, 51, and 6R33)

A generic (now out of stock) 41.5mm dress case from SK Watch Parts.

 

This case was meant to hold a Miyota 8215, but I wanted to put a 6T33 in it for my Silly Walks watch project.  https://youtu.be/O-ZgsYujki8

Bulova 96B85

A generic 43mm dive case from eBay/AliExpress.

 

This was to transplant the original movement in the Bulova into a newer and bigger case.  https://youtu.be/lL0Yqkvrfm8